Do you want to keep your furniture and woodwork in good condition for a long time? Protect them against stains and damage as well as UV rays by using our protective finish. SamaN Abrasin oil is easily applied by wiping, resulting in a hand-polished finish; ideal for a rustic or Scandinavian effect without shine.
With its deep penetrating formula and high-quality pigments, your unvarnished dry and aged wood will surely regain its original shine. With over 10 colors that can be mixed together, you will undoubtedly find the perfect color to match your decor.
Since our oil contains a minimal amount of refined solvents, its VOC content is below the environmental standards scale. In addition to drying quickly, SamaN oil colors, seals and protects all your projects in a single coat. You will be able to enhance the appearance of your floors, furniture and woodwork in just a few days.
Coverage: One 946 ml (1L) container covers approximately 300 sq. ft. (28 m2) depending on the porosity of the wood. Do not dilute.
Our Abrasin Oil is for use on bare or stained wood only. It is designed for interior use on all wood surfaces: paneling, trim, hardwood floors, window frames, moldings and more.
Surface preparation:
Remove all traces of oil finish with paint thinner.
Sand the surface following the grain of the wood with 120-grit sandpaper. For a floor; finish with 150-grit sandpaper.
Remove all residue caused by sandblasting.
Apply one coat (recommended)
Wait a minimum of 4 hours after applying a SamaN stain before using Abrasin oil.
Application :
Stir vigorously so that the pigments mix evenly with the oil to obtain a light amber color.
Do a test in an inconspicuous place to check if the color and effect obtained are those desired.
Apply with a soft cloth or cotton wick (SamaN Kit 60-004) and leave to penetrate for 5 to 10 minutes. Important: remove excess with a new, clean, soft cloth and wipe immediately.
For a shinier surface, apply a SamaN water-based or hybrid varnish seven days after applying the tung oil.
SAMAN TUNG OIL NATURAL 946 ML
Description
Do you want to keep your furniture and woodwork in good condition for a long time? Protect them against stains and damage as well as UV rays by using our protective finish. SamaN Abrasin oil is easily applied by wiping, resulting in a hand-polished finish; ideal for a rustic or Scandinavian effect without shine.
With its deep penetrating formula and high-quality pigments, your unvarnished dry and aged wood will surely regain its original shine. With over 10 colors that can be mixed together, you will undoubtedly find the perfect color to match your decor.
Since our oil contains a minimal amount of refined solvents, its VOC content is below the environmental standards scale. In addition to drying quickly, SamaN oil colors, seals and protects all your projects in a single coat. You will be able to enhance the appearance of your floors, furniture and woodwork in just a few days.
Coverage: One 946 ml (1L) container covers approximately 300 sq. ft. (28 m2) depending on the porosity of the wood. Do not dilute.
Description
Instructions
Before you begin:
Our Abrasin Oil is for use on bare or stained wood only. It is designed for interior use on all wood surfaces: paneling, trim, hardwood floors, window frames, moldings and more.
Surface preparation:
Application :
Drying time:
From 6 to 8 hours.
Cleaning tools:
Clean all tools and equipment with paint thinner.
Related Products
TITEBOND PAINTER’S CAULK
Buy NowVARATHANE TRIPLE THICK ONE COAT CLEAR FINISH INTERIOR (WATER-BASED)
Buy NowVARATHANE DIAMOND WOOD FINISH FLOOR (WATER-BASED)
Buy Now