Varnishing a hardwood floor is not a project to be taken lightly, but with the right and effective products, you will enjoy it much longer. Our water-based varnish is twice as resistant as a traditional water-based varnish and dries quickly to a clear, quality finish.
Available in matte, satin, semi-gloss and glossy finishes, its self-leveling formula with anti-UV offers more than durable results. Our water-based varnish is just as suitable for your floor as for the office furniture that you have wanted to varnish for 2 years, your cabinets or those moldings that need a facelift!
Coverage: One 946 ml (1L) container covers approximately 150 sq. ft. for 1 coat. We recommend 3 coats for a floor.
Make sure the mixture is at room temperature. Stir the varnish with a stick so that the material at the bottom of the container comes off and mixes perfectly with the rest before starting.
Surface preparation:
Bare Wood: Sand with 120 or 150 grit fine sandpaper. Do not use steel wool. Vacuum and wipe with a clean, dry cloth. Varnished Wood: Surface must be dry, clean and free of dust, mold, wax, grease and moisture. Wash surface with TSPeco SamaN and lightly sand with 120 or 150 grit fine sandpaper. Stained Wood: Ensure surface is completely dry before applying product to prevent stain pigments from bleeding into the varnish, resulting in an uneven finish.
Application :
Apply 2-3 even coats of SamaN water-based varnish following the grain of the wood. Use a good quality brush, 8mm lint-free roller or HVLP spray gun.
Sand between each coat with sandpaper with a grit between 180 and 220.
Vacuum dust and wipe with a clean, damp cloth to remove residue.
Repeat this process between each coat of varnish to be applied.
Drying time:
Allow 1-2 hours to dry between coats.
Wait 24 hours before allowing light circulation and one week to put the furniture back.
Wait two weeks for heavier traffic, to let animals move around or to lay down a mat.
The varnish will be completely cured after 30 days.
Cleaning tools:
Clean all tools and equipment with hot, soapy water immediately after use.
SAMAN WATERBASE VARNISH SEMI-GLOSS 236 ML
Description
Varnishing a hardwood floor is not a project to be taken lightly, but with the right and effective products, you will enjoy it much longer. Our water-based varnish is twice as resistant as a traditional water-based varnish and dries quickly to a clear, quality finish.
Available in matte, satin, semi-gloss and glossy finishes, its self-leveling formula with anti-UV offers more than durable results. Our water-based varnish is just as suitable for your floor as for the office furniture that you have wanted to varnish for 2 years, your cabinets or those moldings that need a facelift!
Coverage: One 946 ml (1L) container covers approximately 150 sq. ft. for 1 coat. We recommend 3 coats for a floor.
Description
Instructions
Before you begin:
Make sure the mixture is at room temperature. Stir the varnish with a stick so that the material at the bottom of the container comes off and mixes perfectly with the rest before starting.
Surface preparation:
Bare Wood: Sand with 120 or 150 grit fine sandpaper. Do not use steel wool. Vacuum and wipe with a clean, dry cloth.
Varnished Wood: Surface must be dry, clean and free of dust, mold, wax, grease and moisture. Wash surface with TSPeco SamaN and lightly sand with 120 or 150 grit fine sandpaper.
Stained Wood: Ensure surface is completely dry before applying product to prevent stain pigments from bleeding into the varnish, resulting in an uneven finish.
Application :
Drying time:
Cleaning tools:
Clean all tools and equipment with hot, soapy water immediately after use.
Related Products
ECOPOXY METALLIC COLOUR EPOXY PIGMENTS
Buy NowVARATHANE TRIPLE THICK ONE COAT CLEAR FINISH INTERIOR (WATER-BASED)
Buy NowVARATHANE NATURAL OIL FINISH INTERIOR/EXTERIOR (OIL-BASED)
Buy Now